397
4.
Press the / buttons to select [Barcode Checker] > [Settings] > [Mode], and
then press the button.
5.
Press the / buttons to select the mode for the barcode check function.
[Disabled]
Disable the barcode check function.
[Readable]
Enable readable mode.
[Comparison]
Enable comparison mode. This mode is for barcodes created by barcode commands.
6.
Press the button to save the setting value.
• When the readable mode or comparison mode is set, a barcode reader connection
error occurs if the barcode checker is not connected at product startup or at the start of
printing.
• Even if the readable mode or comparison mode is set, the barcode check is not done
for print data that does not include any barcode data. Normal printing is done for that
data.
To Next Page
Loading...