237
• You can change the units to dots, " (inches), or mm in the [System] > [Regional] >
[Unit] menu.
• Set a value that includes the liner.
When the settings are complete, select [Save as], press the button, and input a name.
You can enter a maximum of 32 characters. Alphabets, numbers and symbols can be used.
After inputting a name, press the button, and press the button in the confirmation
screen to confirm.
If you specify a name that is the same as a registered RFID tag model, a confirmation message
appears. To overwrite the settings, press the button.
[Delete]
Delete registered RFID tag models.
You can use this if more than one RFID tag model has been registered.
Select the RFID tag model to delete and press the button, and then press the
button in the confirmation message.
To Next Page
Loading...