SATO S84NX - Page 243

243
[Character Code]
Set the character code to be used.
The options vary depending on the kanji code set in the [Kanji Set]:
• When set to [JP-COMPATIBLE] or [JP-JISX0208]
◦ [JIS]
◦ [SJIS]
◦ [UTF-16]
◦ [UTF-8]
• When set to [JP-JISX0213]
◦ [SJIS]
◦ [UTF-16]
◦ [UTF-8]
• When set to [GB18030]
◦ [GB18030]
◦ [UTF-8]
• When set to [BIG5]
◦ [BIG5]
◦ [UTF-8]
• When set to [KSC5601]
◦ [KSC5601]
◦ [UTF-8]
[Kanji Style]
Set the font to be used.
The options are as follows:
• [Mincho]
• [Gothic]
[Proportional]
Set whether to print each character using a proportional pitch or fixed pitch.
The options are as follows:
Enabled
Print each character with a proportional pitch.