SATO S84NX - Page 259

259
Enabled
Enable AEP mode.
Disabled
Disable AEP mode.
• A message prompting you to restart the product will appear on the Online/Offline
screen if you have made any changes. In such a case, reboot the product to apply the
settings.
[Starting Application]
Select the application to start at product startup in AEP (Application Enabled Printing) mode.
Select the application using the / buttons and press the button to confirm.
• The simple standalone application is preloaded as the initial setting of the starting
application in AEP mode.
[Delete Application]
Delete installed applications from the list.
Select the application to be deleted using the / buttons and press the button to
confirm.
[Label Rotation]
Set whether to rotate the page orientation for label printing.
The options are as follows:
Enabled
Rotates the page orientation 180 degrees.
Disabled
Does not rotate the page orientation.