SATO S84NX - Page 261

261
[Unit]
Set the unit of length for indication.
The options are as follows:
• [dot]
• ["] (inches)
• [mm]
[Time]
Set the time.
You can set the time only if you have selected [Disabled] in the [Interface] > [Network] > [Services] >
[NTP] > [Enable] menu.
After setting the time and pressing the button, the confirmation screen appears.
Press the button to cancel, or press the button to confirm the setting.
[Date]
Set the date.
You can set the date only if you have selected [Disabled] in the [Interface] > [Network] > [Services] >
[NTP] > [Enable] menu.
The setting range is as follows:
2000-01-01 to 2035-12-31
• The date format is Year - Month - Date.
After setting the date and pressing the button, the confirmation screen appears.
Press the button to cancel, or press the button to confirm the setting.
[Time Zone]
Set the time zone.
First select the region from the [Region] list.
Then select the city from the [City] list.
[Display Language Icon]
Set whether to display the [Language] icon on the top screen of the [Settings] menu.
The options are as follows:
Enabled
Display the [Language] icon.
Disabled
Do not display the [Language] icon.