31
Internal View
(1) USB connector (Type A)
Enable the storage of product settings information with USB memory.
Also, other devices like a barcode checker, barcode scanner or keyboard can be connected.
• Be sure to perform a virus check on the USB memory before connecting it to the
product. SATO Corporation shall not be held responsible for any product malfunctions
caused by a virus spread via USB memory.
• Be sure to insert and remove the USB memory stick perpendicular to the connector.
• The size of the USB memory that can be connected to the side of the product is as
follows:
◦ Length: under 68 mm (2.68") (excludes the metal part of the connector)
◦ Width: under 27.6 mm (1.09")
◦ Thickness: under 8.6 mm (0.34")
(2) Ribbon supply spindle
(3) Media guide
(4) Feed lock latch
Used to open the feed roller and media sensor assembly.
(5) Feed roller and media sensor assembly
(6) Feed roller (Consumables)
To Next Page
Loading...