334
Timing Chart (With Head Check)
*1 Keep the PRIN (Print Start) signal until the PREND (Print End) signal is outputted. And then, turn
the PRIN (Print Start) signal off before the PREND (Print End) signal detects that printing has ended.
*2 Keep the DISPENSE IN signal until the Home Position signal is output. And then, turn the
DISPENSE IN signal off before the PRIN (Print Start) signal is input.
*3 If you have selected [Enabled] for [Printing] > [Advanced] > [Printing Operations] > [Throughput
Mode], then it is 7.5 ms.
To Next Page
Loading...