SATO S84NX - Page 368

Pressure Balance Setting
368
Media Thickness
(mm (inch))
0.05 to 0.20 (0.002" to 0.0079")
Thin paper/normal label, etc.
0.20 to 0.31 (0.0079" to 0.30122")
Thick paper/tag, etc.
S84NX 30 to 128
(1.18" to 5.04")
10 to 30
(0.39" to 1.18")
30 to 128
(1.18" to 5.04")
10 to 30
(0.39" to 1.18")
Media
Width
(mm (inch))
S86NX 80 to 177
(3.15" to 6.97")
51 to 80
(2.01" to 3.15")
80 to 177
(3.15" to 6.97")
51 to 80
(2.01" to 3.15")
Pressure Balance
Adjustment Dial
•
The factory default setting is .
• The thickness of the media includes the liner.
• The dial setting values in the table are only for reference, and the values may vary
depending on the media type. Be sure to check if the print quality is stable by actually
printing.