37
After you complete or cancel the print job, you can show the Settings mode.
(1) Cancel the print job.
When there are no print jobs, the product changes to Online mode.
(2) Change to Online mode.
(3) Feed the media.
(4) Shows the [Shortcut] menu when the print job is paused.
Shows the Settings mode when there are no print jobs.
Displays Shared in Online/Offline Mode
The following information appears on the left side of the screen.
(1) Current printer language
You can set the printer language in the [Applications] > [Protocol] menu in the Settings mode.
(2) Model name
(3) Print Method of the product
Shows whether the product is combined direct thermal/thermal transfer model (TT), or direct
thermal only model (DT).
(4) Resolution of the product
To Next Page
Loading...