SATO S84NX - Page 415

415
Initial ValueSetting Item
S84NX S86NX
Initialized by
User Reset/
Factory Reset
[PSK] - Yes/Yes
[EAP Conf.]
[EAP Mode] [FAST] Yes/Yes
[Inner Method] [AUTO] Yes/Yes
[Username] - Yes/Yes
[Password] - Yes/Yes
[Anon. Outer ID] - Yes/Yes
[Verify Server Cert.] [Enabled] Yes/Yes
[Private Key P/W] - Yes/Yes
[PAC Auto Provisioning] [Disabled] Yes/Yes
[PAC P/W] - Yes/Yes
[Interface] [Auto] Yes/Yes
• [Network] > [Services] > [Ports]/[NTP]/[LPD]/[FTP]/[SNMP]
Initial ValueSetting Item
S84NX S86NX
Initialized by
User Reset/
Factory Reset
[Ports]
[Port1] 1024 Yes/Yes
[Port2] 1025 Yes/Yes
[Port3] 9100 Yes/Yes
[Flow Control] [Status4 ENQ] Yes/Yes
[TCP Connection Queue] [Enabled] Yes/Yes
[Legacy Status for Port 9100] [Disabled] Yes/Yes
[ENQ Reply Delay] 0 ms Yes/Yes
[Status4 Cyclic Response] 500 ms Yes/Yes
[BCC] [Disabled] Yes/Yes
[NTP]