SATO S84NX - Page 423

423
Initial ValueSetting Item
S84NX S86NX
Initialized
by User
Reset/
Factory
Reset
[Signal State] [Active High] Yes/Yes
[PIN16]
[Function] [Ribbon End]
S84NX RFID
models:
[RFID Tag Error]
Yes/Yes
[Signal State] [Active Low] Yes/Yes
[PIN17]
[Function] [Paper End]
S84NX RFID
models:
[Paper End/Ribbon
End]
Yes/Yes
[Signal State] [Active Low] Yes/Yes
[PIN18]
[Function] [Ribbon Near End] Yes/Yes
[Signal State] [Active High] Yes/Yes
[PIN19]
[Function] [Unassigned] Yes/Yes
[Signal State] - Yes/Yes
• [RFID]
Setting Item Initial Value Initialized by
User Reset/
Factory
Reset
[Antenna Position] [Normal] Yes/Yes
[Write Power] 15 dBm Yes/Yes
[Read Power] 15 dBm Yes/Yes
[Tag Offset] 0 mm Yes/Yes