SATO S84NX - Page 535

535
Item S84NX S86NX
Storage Humidity
(without supply
products)
15 to 90% RH (Non-condensing)
Print
Item S84NX S86NX
Print Method Direct thermal, combined direct thermal/thermal transfer
Resolution (Head
Density)
• 203 dpi (8 dots/mm)
• 305 dpi (12 dots/mm)
• 609 dpi (24 dots/mm)
• 203 dpi (8 dots/mm)
• 305 dpi (12 dots/mm)
Print Speed
203 dpi
4 to 16 inches/sec (101.6 to
406.4 mm/sec)
305 dpi
4 to 14 inches/sec (101.6 to
355.6 mm/sec)
609 dpi
2 to 6 inches/sec (50.8 to 152.4
mm/sec)
203 dpi
4 to 14 inches/sec (101.6 to
355.6 mm/sec)
305 dpi
4 to 12 inches/sec (101.6 to
304.8 mm/sec)
Non-printable Area Pitch direction (Excludes liner)
Top
1.5 mm (0.06")
Bottom
1.5 mm (0.06")
Width direction (Excludes liner)
Left
1.5 mm (0.06")
Right
1.5 mm (0.06")
• (S84NX only) For RFID models, printing around the chip or
on the antenna may be limited by the layout.