SATO S84NX - Page 545

545
Standard specifications
Pin No.
25-
pin
14-
pin
I/O Description Electric Conditions
(Voltage, Current (Max))
1 14 - Frame Ground -
2 - - Power source +5 V
600 mA
3
3 - Output
Home Position signal
Outputs a signal when [Backfeed] in
the [Printing] menu is set to [Controled]
and backfeed is done.
40 V
80 mA
4 4 Output
Machine Error
Outputs a low signal when an error,
such as cover open, head error, or
communication error, is detected.
40 V
80 mA
5 6 Output
Print Done/Print End signal (PREND)
Outputs a signal when the media print
is completed.
40 V
80 mA
6 9 Output
Print Ready signal
Outputs a high signal when the product
is in Online mode and ready for
printing.
40 V
80 mA
7 -
Input
2
Label Near End signal
The product becomes label near end
status when a low signal is detected.
High: high impedance
Low: more than -5 mA, 0 V
8 7
Input
2
Reprint signal (PRIN2)
Prints the previously printed content
again when a low signal is detected.
High: high impedance
Low: more than -5 mA, 0 V