SATO S84NX - Page 557

557
Item S84NX S86NX
3 ips: 37 to 359 mm (1.46" to 14.13")
4 ips: 37 to 359 mm (1.46" to 14.13")
5 ips: 37 to 359 mm (1.46" to 14.13")
6 ips: 37 to 359 mm (1.46" to 14.13")
7 ips: 37 to 359 mm (1.46" to 14.13")
8 ips: 37 to 359 mm (1.46" to 14.13")
9 ips: 37 to 359 mm (1.46" to 14.13")
10 ips: 37 to 359 mm (1.46" to 14.13")
11 ips: 37 to 359 mm (1.46" to 14.13")
12 ips: 37 to 359 mm (1.46" to 14.13")
13 ips: 44 to 359 mm (1.73" to 14.13")
14 ips: 49 to 359 mm (1.93" to 14.13")
15 ips: 53 to 359 mm (2.09" to 14.13")
16 ips: 59 to 359 mm (2.32" to 14.13")
Media Width 10 to 128 mm (0.39" to 5.04") 51 to 177 mm (2.01" to 6.97")
Media Width (With
Liner)
13 to 131 mm (0.51" to 5.16") 54 to 180 mm (2.13" to 7.08")
*Above pitch and width are valid for die-cut labels. For media without liner, such as tags or non
die-cut labels, use the 'with liner' values.
• The usable media sizes and print quality depends conditions such as print speed,
media, media/ribbon combination, product settings and used environment. It is highly
recommended to check the performance based on actual usage conditions in advance.
Core Diameter (Media Roll)
• φ76 mm (φ3")
Thickness
• 50 to 310 μm (0.050 to 0.310 mm (0.0020" to 0.012"))
• The thickness of the thickest part of the RFID tag is more than 310 μm (0.31 mm
(0.012")). Be sure to do tests beforehand.