SBC PCD2 Series User Manual

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01
5-128
I/O modules PCD1|PCD2
PCD2.H31x
5
Block diagram
A
/A
B
/B
/IN
IN
A
B
IN
5V
En-
co-
der
24V
En-
co-
der
LS ref
(H310)
PID
regulator
Trajector
generator
Out (+/- 10V)
to amplifier
Bus Interface
PCD Bus
Position counter
H310
H311
Encoder
Supply 5 V
H311
Enc.
For further information, please refer to manual 26/762, “PCD2.H31x - motion con-
trol module for stepper motors”
Watchdog: This module cannot be used on the base address 240 (or 496 for the
PCD2.M17x), because it would interact with the watchdog, and would cause a
malfunction.
For details, please refer to the section A4 “Hardware Watchdog”, which describes
the correct use of the watchdog in conjunction with PCD components.

SBC PCD2 Series Specifications

General

Brand	SBC
Model	PCD2 Series
Category	I/O Systems
Language	English