SBC PCD2 Series - User Manual

Document 27-600 | Release ENG09 | 2019-05-01
Manual
I/O-modules
for PCD1 / PCD2 series
and for PCD3 series
I/O-Modules
for PCD1 / PCD2
and PCD3

Summary

5 Input;output (I;O) modules for PCD1 and PCD2

5.1 General informations

Overview of available digital and analogue I/O modules, counters, etc. for PCD2.

5.2 Digital input modules

Details on PCD2 digital input modules with various resolutions and connectors.

5.4 Digital output modules

Details on PCD2 digital output modules with different current ratings and connectors.

5.5 Digital output modules, electrically isolated

Information on PCD2 digital output modules with electrical isolation.

5.8 Analogue input modules

Overview of PCD2 analogue input modules, including resolution and signal ranges.

5.10 Analogue output modules

Overview of PCD2 analogue output modules with different resolutions and signal ranges.

5.18 Motion control modules for stepper motors

Technical details and application of PCD2 motion control modules for stepper motors.

5.19 Motion control modules for servo-motors

Technical details and application of PCD2 motion control modules for servo-motors.

6 Input;output (I;O) modules for PCD3

6.1 Introduction to I;O modules

Overview of PCD3 I/O modules and their connection to Saia PCD® or RIO systems.

6.2 Digital input modules

Details on PCD3 digital input modules with various resolutions and connectors.

6.4 Digital output modules

Details on PCD3 digital output modules with different current ratings and connectors.

6.5 Digital output modules, electrically isolated

Information on PCD3 digital output modules with electrical isolation.

6.8 Analogue input modules

Overview of PCD3 analogue input modules, including resolution and signal ranges.

6.10 Analogue output modules

Overview of PCD3 analogue output modules with different resolutions and signal ranges.

6.17 Counting and motion control I;O modules

List of PCD3 counting and motion control I/O modules.

7 PCD2.B160 & PCD3.B160

7.1 Module Overview

General description of the PCD2.B160 & PCD3.B160 digital I/O module.

7.2 Hardware

Details on the hardware configuration and compatibility of the module.

7.3 Configuration in PG5 device Configurator

Steps for configuring the module using PG5 software.

7.4 Media Mapping

Explanation of symbols and descriptions used in media mapping.

7.5 Direct input or output access in IL

How to access module data directly using IL commands.

7.6 Error PCD XOB 13

Explains the conditions under which XOB 13 error occurs.

8 PCD2.W380 & PCD3.W380

8.1 PCD2;3.W380, 8 analog configurable inputs

Overview of the PCD2/3.W380 module and its features.

8.2 Preparing the PLC system

Steps to prepare the PLC system for the module.

8.3 Module in PG5 environment

Guidance on using the module within the PG5 software environment.

8.4 Example of linearization

Demonstrates linearization for NTC sensors or temperature measurements.

9 PCD2.G200

9.1 Overview PCD2.G200

Introduction to the PCD2.G200 multifunction module.

9.2 Specifications

Detailed technical specifications for the PCD2.G200 module.

9.3 Preparing the PLC system

Steps for preparing the PLC system for the PCD2.G200 module.

9.4 Example of linearization

Demonstrates linearization for NTC sensors with the PCD2.G200.

A Appendix

A.1 Icons

Explanation of symbols used in the manual.

A.3 Abbreviations

Glossary of technical abbreviations used in the document.

A.4 Hardware watchdog

Information about the hardware watchdog feature and its restrictions.

A.5 Sicherheitshinweise

Safety instructions and warnings for device installation and handling.

A.6 Installation direction and relays contact protection

Guidance on installation and relay contact protection.

A.6 Contact

Contact information for Saia-Burgess Controls AG.

SBC PCD2 Series Specifications