SBC PCD2 Series - Motion Control Modules for Servo-Motors

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01
5-124
I/O modules PCD1|PCD2
Motion control modules for servo-motors
5
5.19 Motion control modules for servo-motors
PCD2.H310
Motion control module for servo-motors,
1-axis encoder, 24 V
PCD2.H311
Motion control module for servo-motors, 1-axis encoder, 5 V
PCD2.H320
Motion control module for servo-drives,
2-axis with 24 V encoder
PCD2.H322
Motion control module for servo-drives,
1-axis with 24 V encoder (slave operation)
PCD2.H325
Motion control module for servo-drives,
2-axis with 5 V and SSI absolute value encoder
PCD2.H327
Motion control module for servo-drives, 1-axis with 5 V
encoder and SSI absolute value encoder (slave operation)
I/O modules and I/O terminal blocks may only be plugged in and removed when
the Saia PCD
®
and the external +24 V are disconnected from the power supply.