Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01
6-109
I/O modules PCD3
PCD3.W720
6
6.15 Weighing modules
PCD3.W710 1-channel weighing module for 4/6-wire weighing cells
PCD3.W720 2-channel weighing module for 4/6-wire weighing cells
¹) These I/O modules cannot currently be used with the PCD3 RIO head station
I/O modules and I/O terminal blocks may only be plugged in and removed when the
Saia PCD
®
and the external +24?V are disconnected from the power supply.
6.15.1 PCD3.W7x0
The PCD3.W7x0 module is described in Manual 26-833.
To Next Page
Loading...
