SBC PCD2 Series - Counting and Motion Control I;O Modules

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01
6-111
I/O modules PCD3
Counting and motion control I/O modules
6
6.17 Counting and motion control I/O modules
PCD3.H100 Counter module up to 20 kHz
PCD3.H110 General purpose counting and measuring module up to
100 kHz
PCD3.H150 SSI interface module
PCD3.H210 Motion control module for stepper motors ¹)
PCD3.H310 Motion control module for servo-motors, 1-axis encoder, 24 V ¹)
PCD3.H311 Motion control module for servo-motors, 1-axis encoder, 5 V ¹)
¹) These I/O modules cannot currently be used with the PCD3 RIO head station
I/O modules and I/O terminal blocks may only be plugged in and removed when the Saia
PCD
®
and the external +24?V are disconnected from the power supply.