SBC PCD2 Series - Analogue Input Modules, Electrically Isolated from the I;O Bus

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01
6-73
I/O modules PCD3
Analogue input modules, electrically isolated from the I/O Bus
6
6.9 Analogue input modules, electrically isolated from the I/O Bus
PCD3.W305 7 electrically isolated analogue inputs 12 bit, 0…10 V
PCD3.W315 7 electrically isolated analogue inputs 12 bit, 0…20 mA
PCD3.W325 7 electrically isolated analogue inputs 12 bit, –10 V…+10 V
Galvanic separation of inputs to Saia PCD
®
, channels themselves not separated
I/O modules and I/O terminal blocks may only be plugged in and removed when the Saia
PCD
®
and the external +24?V are disconnected from the power supply.