SBC PCD2 Series User Manual

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01
9-7
PCD2.G200
Preparing the PLC system
9
9.3.2 Preparing PG5
The PCD2.G200 module can only be used with the software version PG5 2.1.200
or newer. Please, verify if your system is up-to-date.
YoundthelastPG5versiononthesupportWebsitewww.sbc-support.com.
From PG5 version V2.1.300 on the PCD2.G200 is fully supported.
For older versions the following templates:
● pcd2multifunction.saiaxml PCD2.G200conguration
● pcd1mxxx0.saiaxml PCD1 modul selection
● pcd2mxx0.saiaxml PCD2 modul selection
Have to be copied in the template directory.
Example: C:/Program Files (x86)/Saia-Burgess/PG5 V2.1.200/DeviceTemplates
9.3.2.1 Device congurator
9.3.2.1.1 Choosing the module
The PCD2.G200 can be selected from the Multi-Function Modules and placed on
Slot0 for PCD1:
Figure6:DeviceCongurator
For PCD1 systems only the Slot0 is allowed. For PCD2 systems only the even
slots (0,2,4,6) are allowed.

SBC PCD2 Series Specifications

General

Brand	SBC
Model	PCD2 Series
Category	I/O Systems
Language	English