SBC PCD2 Series - Module in PG5 Environment; Preparing; Choosing the Module

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01
8-13
PCD2.W380 & PCD3.W380
Module in PG5 environment
8
8.3 Module in PG5 environment
8.3.1 Preparing PG5
This module can only be used with the software version PG5 2.1.300 or higher.
Please,verifyifyoursystemisup-to-date.YoundthelastPG5versiononthe
support Website www.sbc-support.com.
8.3.2 Choosing the module
Figure 8: List of modules in PG5