SBC PCD2 Series - Page 150

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01
6-7
I/O modules PCD3
Introduction to I/O modules
6
Plug-in cage clamp terminals
The plug-in cage clamp terminals sim-
plifytheinstallationsignicantly.The
cage clamp terminals support cable
diameters from 1.0 mm
2
through
1,5 mm
2
to 2.5 mm
2
.
Screwdrivers of type SDI 0.4 × 2.5 × 80
should be used
(max. width: 2.5 mm).