Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01
6-31
I/O modules PCD3
PCD3.A465
6
Output circuits and terminal designation
A15 A14 A13 A12 A11
17,19,
21, 23
16,18,
20,22
15 14 13 12
11
8 bit latch
Screwless
terminals
Loads
10...32 VDC
LEDs
Watchdog: This module can interact with the watchdog, if it is used on base address 240. In
this case, the last input with address 255 cannot be used.
For details, please refer to the section A4 “Hardware Watchdog”, which describes the correct
use of the watchdog in conjunction with PCD components.
To Next Page
Loading...
