SBC PCD2 Series User Manual

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01
5-14
I/O modules PCD1|PCD2
PCD2.E160/161
5
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33
E15 E0E8 E7
L L L L L L L L
E15
E14
E13
E12
E11
E10
E9
E8
E7
E6
E5
E4
E3
E2
E1
E0
For every 2 inputs, a 3-colour LED is tted:
LED
E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 E10 E11 E12 E13 E14 E15
o󰀨 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
red 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
green 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
SaiaBurgessControlsprovidesawiderangeofpre-conguredcableswitha34-
pole ribbon connector at one or both ends.
These connection cables can be plugged at one end into the PCD2.E160 I/O
module and at the other end into an I/O terminal adapter.
The following adapters are obtainable from Saia Burgess Controls: terminal
adapters for connecting 3-wire sensors to individual terminals for Signal, Plus and
Minus;terminaladaptersforconnecting16I/OswithandwithoutLEDandrelay
interface;andterminaladapterswithchangeovercontactsforsignalconversionfor
digital output modules.
Further information can be found in the Manual on “System cables and connec-
tion system” 26/792.
The following materials can be ordered from ‘3M’:
● Socketconnector34-pole   Type3414-6600
● (Metalstrainrelief)*)    Type3448-2034
● (Handleforsocketconnector34-pole)*) Type3490-3
Matching cables can be ordered in reels from ‘3M’:
● Ribboncable34-pole,
 greywithpin1identication   Type3770/34or3801/34
● Roundcable34-pole,
 greywithpin1identication   Type3759/34
*)optional

SBC PCD2 Series Specifications

General

Brand	SBC
Model	PCD2 Series
Category	I/O Systems
Language	English