SBC PCD2 Series - Page 289

Saia-Burgess Controls AG
Manual I/O-modules for PCD1 │ PCD2 series │ Document 27-600 – Release ENG09 │ 2019-05-01
7-15
PCD2.B160 & PCD3.B160
Error PCD XOB 13
7
7.6 Error PCD XOB 13
The XOB 13 error happens if the PCD wants communicate with the module but it
is not in the slot.
In case of reset of the module (Watchdog UC), XOB13 happens if PCD try access
to the module during restart.