Electric specification
INVERTER INTRODUCTION 12
3. INVERTER INTRODUCTION
3.1 Electric specification
3.1.1 440V series three-phase
Rated output capacity (kVA)
Applicable motor capacity (HP)
Applicable motor capacity (kW)
150% 60 seconds, 200% 1 seconds (inverse-time characteristics)
Rated input current (A) *Note 1
3 phase 380-480V 50Hz / 60Hz
Rated input AC voltage/ frequency
3 phase 323-528V 50Hz / 60Hz
Permissible AC voltage fluctuation
Permissible frequency fluctuation
Power supply capacity (kVA)
Rated output capacity kVA
Applicable motor capacity HP
Applicable motor capacity kW
150% 60 seconds (inverse-time characteristics)
Rated output capacity kVA
Applicable motor capacity HP
Applicable motor capacity kW
120% 60 seconds (inverse-time characteristics)
Rated input AC voltage/ frequency
3 phase 380-480V 50Hz / 60Hz
Permissible AC voltage fluctuation
3 phase 323-528V 50Hz / 60Hz
Permissible frequency fluctuation
Power supply capacity kVA
Note 1: The value indicates the current at rated output. The rated input current value is not only affected by power
transformer, input side reactor, wiring condition, but also fluctuates with the impedance of the power supply side.