Shihlin electric SC3 Series User Manual

Basic Parameter Group 01
PARAMETER DESCRIPTION 71
5.2.7 JOG run
 The frequency and acceleration/deceleration time for JOG running can be set. JOG can be used for conveyor
positioning, test run, etc.
Parameter
Name
Default
Setting Range
Content
01-13
P.15
JOG frequency
5.00Hz
0～650.00Hz
---
01-14
P.16
JOG Acc/ Dec time
0.50s
0～360.00s/
0～3600.0s
01-08(P.21)=0/
01-08(P.21)=1
JOG operation

In JOG mode, the output frequency is the set value of 01-13(P.15), and the acceleration / deceleration time is the
set value of 01-14(P.16).
01-03(P.15)
01-09(P.20 )
01-14
(P.16 )
01-09(P.20 )
01-14
(P.16 )
Forward
Reverse
ON
ON
FWD
REV
Time
Output
frequency
01-03(P.15)
Note:1. Please refer to Section 4.3.3 Basic operation steps for JOG mode for how to enter the JOG mode.
Setting

Shihlin electric SC3 Series Specifications

General

Brand	Shihlin electric
Model	SC3 Series
Category	Inverter
Language	English