User registered parameter 15
PARAMETER DESCRIPTION 159
User registered parameter
The parameter values set in this parameter group will not be restored to the factory default value when performing
00-02=5/6（P.999=2/3）
The parameter value set in this parameter group is the parameter number required to be registered by the user.
The parameter values of the registered parameter number will not be restored to the factory default value when
performing 00-02=5/6 （P.999=2/3）
Please refer to 5.1.2 parameter management section for the setting of restoring the factory default value.
To Next Page
Loading...
Need help?
General
