SICK EtherCAT microScan3

If you select the Aut
omatic option, the drawn areas are immediately converted into
fields.
Use global geometry
You specify whether global geometries are used.
Display reference contour field
Y
ou determine whether the reference contour field is displayed.
Drawing surface
Y
ou can use a Cartesian or a polar coordinates system and select the colors for the
grid, the labels, and the drawing area.
7.12.6 Editing fields using coordinates
You can use coordinates to edit fields. Depending on the form on which a field is
ba
sed, the appropriate input fields are displayed. The example shows a dialog box for a
rectangle.
CONFIGURATION 7
8025220/1L9Q/2023-08-14 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherCAT®
111
Subject to change without notice