SICK EtherCAT microScan3 User Manual

User name
T
he optional user name helps later users to find a contact for the application.
►
Enter a user name.
Application image
An ima
ge helps to identify the application more quickly. The application image is saved
in the project file on the PC and transmitted to the device. The Safety Designer sup‐
ports the following file formats: BMP, GIF, JPG, PNG, TIF.
1. Click on the pencil icon.
2. Select an image file for the application.
✓
The image is incorporated as a thumbnail.
Description
A de
scription makes it easier to understand an application’s context more quickly.
►
Enter a description with a maximum of 1000characters.
7.8 Protocol settings
7.8.1 EtherCAT FSoE configuration
FSoE Slave Address
In or
der to identify an FSoE device in the network, a unique FSoE address in the 1
to 65,535 range is required. You assign the FSoE address to the device in Safety
Designer. Enter the same address in the safety project of the control.
►
Enter FSoE address.
7 C
ONFIGURATION
96
O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherCAT® 8025220/1L9Q/2023-08-14 | SICK
Subject to change without notice

SICK EtherCAT microScan3 Specifications

General

Scanning angle	275°
Interfaces	EtherCAT
Protection class	IP65
Supply voltage	24 V DC
Resolution for protective field	30 mm
Operating voltage	24 V DC
Scanning range	5.5 m
Number of fields	128
Number of monitoring cases	128
Response time	30 ms
Operating temperature	0 °C to 50 °C
Field of application	Industrial safety
Light source	Infrared laser, 905 nm
Connection type	M12
Weight	1.2 kg