Siemens HydroRanger 200 HMI - Page 83

Commissioning
6.5 Quick Start Wizards
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC
81
Flow time units
Defines the units used to display current flow and logging flow values.
Index
Single-point model
Dual-point model
Global
Transducer
Options
Seconds
Minutes
Hours
*Days
Altered by
Flowrate units (2.13.4.7.) (Page 245)
This is used when the Primary Measuring Device is Ratiometric (Flowrate units (2.13.4.7.)
(Page 245) = Ratiometric).
Example:
Conditions
Enter
Flowrate display: millions of gallons/day,
maximum flowrate is 376,500,000 gal-
lons/day
376.5
for Maximum flow (2.13.4.3.) (Page 243)
Days
for Flow time units (2.13.4.4.) (Page 244)
Low flow cutoff
Eliminates totalizer activity for flows at, or below the cutoff value.
Index
Single-point model
Dual-point model
Global
Transducer
Values
Range: 0.000 ... 9999
Preset = 5.000 %, in equivalent units
Use this to enter the minimum head in Units (2.1.1.) (Page 162)