Commissioning
6.3 Commissioning using the STARTER commissioning tool
SINAMICS DCP
128 Operating Instructions, 09/2019, A5E34382853K
Accessing the STARTER project wizard
Figure 6-2 Main screen of the STARTER parameterizing and commissioning tool
⇒ Close the "STARTER Getting Started Drive Commissioning" screen by selecting HTML
Help > Close.
Note
When you deactivate the Display wizard during start
checkbox, the project wizard is no
longer displayed the next time you start STARTER.
up the project wizard by selecting
Project > New with wizard
.
To deactivate the online help for Getting Started
, follow the instructions provided in the help.
You can call up the online help at any time by selecting Help > Getting Started
.
a detailed online help system.
To Next Page
Loading...
