Commissioning
6.3 Commissioning using the STARTER commissioning tool
SINAMICS DCP
Operating Instructions, 09/2019, A5E34382853K
135
6.3.2.4 Configuring a drive unit
Note: STARTER must be offline.
In the project navigator, open the tree element that contains your drive unit.
Figure 6-12 Configuring the project navigator drive unit
⇒ In the project navigator, click the plus sign next to the drive unit that you want to configure.
The plus sign changes into a minus sign and the options for configuring the drive unit appear
as a directory tree under the drive unit.
⇒ Double click Configure drive unit
To Next Page
Loading...
