Siemens sinamics dcp - 7.6.1.8 Overview of important parameters

Operation
7.6 Communication via PROFINET IO
SINAMICS DCP
Operating Instructions, 09/2019, A5E34382853K
255
7.6.1.8 Overview of important parameters
(see SINAMICS DCP List Manual)
•
p8940[0...239]
CBE2x Name of Station
•
p8941[0...3]
CBE2x IP address
•
p8942[0...3]
CBE2
x Default Gateway
•
p8943[0...3]
CBE2x Subnet Mask
•
p8944
CBE2x DHCP mode
•
p8945
Activating CBE2x interface configuration
•
r8950[0...239]
CBE2x Name of Station actual
•
r8951[0...3]
CBE2x IP Address of Station actual
•
r8952[0...3]
CBE2x Default Gateway
of Station actual
•
r8953[0...3]
CBE2x Subnet Mask of Station actual
•
r8954
CBE2x DHCP Mode actual
•
r8955[0...5]
CBE2x MAC address
•
r8959
CBE2x DAP ID