Electrical connection
5.6 Additional system components
SINAMICS DCP
82 Operating Instructions, 09/2019, A5E34382853K
Disassembly
1. First shift the mounting slide downwards at the lug to release the interlocking with the
mounting rail.
2. Swivel the component to the front and withdraw it upwards from the DIN rail.
Figure 5-25 Removing from a mounting rail
5.6.3.8 Protective conductor connection and shield support
It is always advisable to shield the digital I/O wiring.
The following diagrams show typical Weidmüller shield connection terminals for the shield
supports.
To Next Page
Loading...
