Siemens sinamics dcp - 3.3 Ordering information for options and accessories

Preparations for use
3.3 Ordering information for options and accessories
SINAMICS DCP
Operating Instructions, 09/2019, A5E34382853K
27
3.3 Ordering information for options and accessories
Ordering information for options with order codes
Table 3- 1 Control Unit CUD options
Option
Order codes
Terminal Module Cabinet (TMC) can be snapped onto a 35 mm mounting rail. Enables the simple
connection of the CUD standard signals (X177) via spring-loaded terminals in an easily accessi-
ble area of the control cabinet. The CUD is equipped with an adapter board. Terminal Module
Cabinet and connecting cable (3 m) are supplied separately.
Note:
In the device version with option G63, the X177 terminal connections are no longer available
directly on the CUD.
G63
CBE20
is required for communication via PROFINET, Modbus TCP, EtherNet/IP, SINAMICS Link
G33
Memory card
is required for communication via Modbus TCP, EtherNet/IP, SINAMICS Link
S03
Table 3- 2 Further options
Option
Order codes
Coated modules
Coated modules increase the robustness against climate influences:
• Relative/absolute humidity 5 % to 95 % / 1 to 29 g/m
3
for ambient or coolant temperature
≤30 °C.
• ≤ 60 % when SO
2
and H
2
S are present, and/or for ambient or coolant temperature 30 °C to
40 °C
• Oil mist, salt mist, ice formation, condensation, dripping water, spraying water, splashing water
and water jets are not permitted.
M08
1)
Extension of the warranty conditions by 12 months to a total of 24 months
(2 years) after being delivered
Q80
Extension of the warranty conditions by 18 months to a total of 30 months
(2½ years) after being delivered
Q81
Extension of the warranty conditions by 24 months to a total of 36 months
(3 years) after being delivered
Q82
Extension of the warranty conditions by 30 months to a total of 42 months
(3½ years) after being delivered
Q83
Extension of the warranty conditions by 36 months to a total of 48 months
(4 years) after being delivered
Q84
Extension of the warranty conditions by 48 months to a total of 60 months
(5 years) after being delivered
Q85
Power connections, top/bottom M69
2)
Power connections from below
M79
2)
1)
Can be ordered as an option for 30 kW devices, included in the standard scope of delivery for 120 kW devices.
2)
Can only be ordered for the 120 kW device.