Operation
7.6 Communication via PROFINET IO
SINAMICS DCP
256 Operating Instructions, 09/2019, A5E34382853K
7.6.2 Establishing online operation: STARTER via PROFINET IO
Description
The following options are available for online operation via PROFINET IO:
● Online operation via IP
Requirements
● STARTER with Version ≥ 4.1.5 (SINAMICS DCP is only supported as of STARTER
Version 4.1.5)
● CBE20
STARTER via PROFINET IO (example)
Figure 7-39 STARTER via PROFINET (example)
Procedure for establishing online operation with PROFINET
1. Assign the PG/PC a fixed, free IP address. In our example, we have selected
169.254.11.1. Set the subnet mask to 255.255.0.0.
2. Make the settings in STARTER
3. Select online operation in STARTER.
To Next Page
Loading...
