Operation
7.8 Communication via EtherNet/IP (EIP)
SINAMICS DCP
294 Operating Instructions, 09/2019, A5E34382853K
Figure 7-48 Changing the sequence of the drive objects
The sequence can only be changed offline using the arrows on the right â‘ . For the change
to take effect, it must be subsequently downloaded from the PG/PC to the SINAMICS DCP.
Note
If the secondary conditions described for the commu
nication are not complied with, then
alarm A50011 "EtherNetIP/COMM BOARD; configuration
error" is output.
To Next Page
Loading...
