Operation
7.11 Closed-loop control
SINAMICS DCP
340 Operating Instructions, 09/2019, A5E34382853K
Example: Influence of the current and power limiting for a constant rated voltage on side 1
The following diagrams show as example the influence of the current and power limiting on
the reactor current and the current on the side 2 if side 1 is kept constant at the rated voltage
of 600 V.
Figure 7-71 Example of the influence of the current and power limiting for a 30 kW device
(side 1 is constant at the rated voltage of 600 V, the voltage on side 2 is variable)
Figure 7-72 Example of the influence of the current and power limiting for a 120 kW device
(side 1 is constant at the rated voltage of 600 V, the voltage on side 2 is variable)
To Next Page
Loading...
