Operation
7.20 Write and know-how protection
SINAMICS DCP
Operating Instructions, 09/2019, A5E34382853K
395
Specifying the general memory data
The "General" tab is displayed automatically when the dialog is called. The "Save normally"
option is activated by default.
1. If you want to save the data in compressed form, click the "Save compressed (.zip
archive)" option button.
The "Store additional data on the target device" option is deactivated in the default
setting.
2. If you want to store additional data, such as program sources, on the target device,
activate this option.
Optionally you can also activate "Including DCC chart data". Graphical chart data can
then also be stored.
3. Then enter the path for the storage directory in the appropriate input field, or click
"Browse" and select the directory in your file system.
Configuring know-how protection
Make the settings for the know-how protection on the "Drive unit know-how protection" tab.
1. Click the "Drive unit know-how protection" tab.
Figure 7-93 Load to file system know-how protection
To Next Page
Loading...
