Electrical connection
5.1 EMC-compliant installation
SINAMICS DCP
Operating Instructions, 09/2019, A5E34382853K
39
Figure 5-3 Shield connection for an electric power cable (e.g. connection to DC link, to the battery,
or to a PV field) at point of entry into the cabinet
Figure 5-4 Shield connection for the signal cables in the cabinet
The following rules apply for the connection cables:
● All cables that leave the cabinet system must be "shielded".
● Cables inside the cabinet do not have to be "shielded".
To Next Page
Loading...
