Siemens sinamics dcp - Page 65

Electrical connection
5.6 Additional system components
SINAMICS DCP
Operating Instructions, 09/2019, A5E34382853K
63
X1400 Ethernet interface
Table 5- 4 X1400 Ethernet, ports 1-4
Pin
Signal name
Technical specifications
1
RXP
Receive data +
2
RXN
Receive data -
3
TXP
Transmit data +
4 Reserved, do not use
5
Reserved, do not use
6
TXN
Transmit data -
7
Reserved, do not use
8
Reserved, do not use
Screened
backshell
M_EXT Screen, permanently connected
Connector type: RJ45 socket
Note
The Ethernet interfaces
support Auto MDI(X). It is therefore possible to use both crossover
and straight through cables to connect the devices.
For diagnostic purposes, each port has one green and one yellow LED.
Cable type:
Industrial Ethernet
Max. cable length:
100 m