SINAMICS S120 Combi
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3
99
Reinforcement plates
4
4.1 Description
The reinforcement plates for the S120 Combi fulfill the following functions:
● Air is routed in a specific way to dissipate the heat of the external heat sink
● They stabilize the mounting panel
The reinforcement plates must always be mounted. They should be installed at the rear of
the mounting panel or the control cabinet before installing the S120 Combi Power Module
and the external fan unit.
Note
The reinforcement plates are not included in the scope of delivery of the S120 Combi. They
must be separately ordered (order number 6SL3161-1LP00-0AA0).
To Next Page
Loading...
