Siemens SINAMICS S120 Combi - Standards

System overview
1.4 Standards
SINAMICS S120 Combi
26 Manual, Edition 07/2012, 6SL3097-4AV00-0BP3
1.4 Standards
Note
The standards listed in the table below are non-binding and do not in any way claim to be
complete. The standards listed do not represent a guaranteed property of the product.
Only the statements made in the Declaration of Conformity shall be deemed binding.
Table 1- 5 Fundamental, application-relevant standards in succession: EN, IEC/ISO, DIN, VDE
Standards* Title
EN 1037
ISO 14118
DIN EN 1037
Safety of machinery; avoiding unexpected starting
EN ISO 9001
ISO 9001
DIN EN ISO 9001
Quality management systems - requirements
EN ISO 12100-x
ISO 12100-x
DIN EN ISO 12100-x
Safety of Machinery; General Design Guidelines;
Part 1: Basic terminology, methodology
Part 2: Technical Principles and Specifications
EN ISO 13849-x
ISO 13849-x
DIN EN ISO 13849-x
Safety of machinery; safety-related parts of control systems;
Part 1: General basic design principles
Part 2: Validation
EN ISO 14121-1
ISO 14121-1
DIN EN ISO 14121-1
Safety of Machinery - Risk Assessment;
Part 1: Guidelines
EN 55011
CISPR 11
DIN EN 55011
VDE 0875-11
Industrial, scientific and medical high-frequency devices (ISM devices) -
radio interference - limit values and measuring techniques
EN 60146-1-1
IEC 60146-1-1
DIN EN 60146-1-1
VDE 0558-11
Semiconductor converters; general requirements and line-commutated converters;
Part 1-1: Defining the basic requirements
EN 60204-1
IEC 60204-1
DIN EN 60204-1
VDE 0113-1
Electrical equipment of machines;
Part 1: General definitions
EN 60228
IEC 60228
DIN EN 60228
VDE0295
Conductors for cables and insulated leads
EN 60269-1
IEC 60269-1
DIN EN 60269-1
VDE 0636-1
Low-voltage fuses;
Part 1: General requirements