Siemens SINAMICS S120 Combi - Technical Data

Accessories
12.2 DRIVE-CLiQ coupling
SINAMICS S120 Combi
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3
235
Mounting
1. Attach the DRIVE-CLiQ coupling to the mounting surface as shown in the drilling pattern.
2. Remove the protective caps of the DRIVE-CLiQ coupling.
3. Latch the DRIVE-CLiQ connectors at both sides of the DRIVE-CLiQ coupling.
12.2.6 Technical data
Table 12- 2 Technical data
DRIVE-CLiQ coupling 6SL3066-
2DA00-0AB0
Unit
Weight kg 0,272
Degree of protection IP67 acc. to EN 60529