Siemens SINAMICS S120 Combi - Interface Description; Overview; Dimension Drawing

Accessories
12.1 DRIVE-CLiQ cabinet bushing
SINAMICS S120 Combi
230 Manual, Edition 07/2012, 6SL3097-4AV00-0BP3
12.1.3 Interface description
12.1.3.1 Overview
3
4
5
2
1
① Protective cap, Yamaichi, order number: Y-ConAS-24-S
② DRIVE-CLiQ interface on the outside (to connect DRIVE-CLiQ signal cables MOTION-
CONNECT with IP67 degree of protection)
③ Mounting holes
④ Flange-type seal to ensure degree of protection IP54 on the outside of the control cabinet
⑤ DRIVE-CLiQ interface on the inside (to connect DRIVE-CLiQ signal cables MOTION-
CONNECT with IP20 degree of protection)
Figure 12-1 Interface overview, DRIVE-CLiQ cabinet bushing
12.1.4 Dimension drawing
Figure 12-2 Dimension drawing of the DRIVE-CLiQ cabinet gland, all dimensions in mm and (inches)