Siemens SINAMICS S120 Combi - Installation; Technical Data

Additional system components
10.3 DRIVE-CLiQ Hub Module External DME20
SINAMICS S120 Combi
Manual, Edition 07/2012, 6SL3097-4AV00-0BP3
203
10.3.5 Installation
1





0
① Contact surface
Figure 10-11 Mounting dimensions DME20
Installation
1. Transfer the drilling pattern to the contact surface - the contact surfaces must be bare
unpainted metal.
2. Holes Ø5.3 or threads M5
3. Tighten with a tightening torque of 6.0 Nm.
10.3.6 Technical data
Table 10- 23 Technical data of the DME20
6SL3055-0AA00-6ABx Unit Value
Electronics power supply
Voltage
Current (without DRIVE-CLiQ node)
V
DC
A
DC
24 DC (20.4 – 28.8)
0,15
PE/ground connection Fastened to housing M5 / 6 Nm
Degree of protection IP67
Weight kg 0,8