Siemens SINAMICS S120 Combi User Manual

Preface
SINAMICS S120 Combi
4 Manual, Edition 07/2012, 6SL3097-4AV00-0BP3
SINAMICS
You can find information on SINAMICS at:
http://www.siemens.com/sinamics.
Usage phases and the available tools/documents
Table 1 Usage phase and the available tools/documents
Usage phase Tools
Orientation SINAMICS S Sales Documentation
Planning/configuration SIZER configuration tool
Decision making/ordering SINAMICS S Catalogs
Configuring/installation
• SINAMICS S120 Manuals
• SINAMICS S120 Combi Manual
• SINUMERIK 828D PPU Manual
Commissioning
• SINAMICS S120 Combi List Manual
• SINUMERIK 828D Turning and Milling Commissioning Manual
Usage/operation
• SINAMICS S120 Function Manual FH1
• SINAMICS S120 Combi List Manual
Maintenance/Service
• SINAMICS S120 Combi Manual
• SINAMICS S120 Combi List Manual
Target group
This documentation is intended for machine manufacturers, commissioning engineers, and
service personnel who use the SINAMICS drive system.
Benefits
This manual provides information on the components and functions of devices so that the
target group is capable of installing, setting up, testing, operating, and troubleshooting the
devices safely and correctly.
Standard scope
The scope of the functionality described in this document can differ from the scope of the
functionality of the drive system that is actually supplied.
It may be possible for other functions not described in this documentation to be executed in
the drive system. This does not, however, represent an obligation to supply such functions
with a new control or when servicing.
Functions that are not available in a particular product version of the drive system may be
described in the documentation. The functionality of the supplied drive system should only
be taken from the ordering documentation.

Siemens SINAMICS S120 Combi Specifications

General

Brand	Siemens
Model	SINAMICS S120 Combi
Category	Control Unit
Language	English