NCK start-up
10.5 Parameterize axis data
CNC Part 1 (NCK, PLC, drive)
160 Commissioning Manual, 11/2006, 6FC5397-2AP10-2BA0
Number Name of Identifier Name Referenc
e
34300 ENC_REFP_MARKER_DIST[n] Reference marker distance with distance-
coded scales [encoder number]
34310 ENC_MARKER_INC[n] Interval between two reference marks with
distance-coded scales [encoder no.]
34320 ENC_INVERS[encoder] Linear measuring system inverse to machine
system [encoder number]
34330 REFP_STOP_AT_ABS_MARKER[n] Distancecoded linear measurement system
without destination point [encoder number]
35150 SPIND_DES_VELO_TOL Spindle speed tolerance S1
36302 ENC_FREQ_LIMIT_LOW Encoder limit frequency resynchronization
36310 ENC_ZERO_MONITORING Zero mark monitoring
30250 ACT_POS_ABS Absolute encoder position at time of
deactivation.
Literature
Function Manual Basic Functions; Reference point approach:
To Next Page
Loading...
